Interdisciplinary (Cyber)

Summary

This position is being recruited under 10 USC 1599f into the Cyber Excepted Service and does NOT convey eligibility to be converted to the Competitive Service. It has been identified as a position necessary to carry out and support the mission of the US Cyber Command.

It is in the Professional Work Category at the Full Performance Work Level within the CES Occupational Structure. It is located in the DISA OC/DISA Global Field Command, Infrastructure and Services Division (RN412).

Duties

• Analyzes new service or capability concepts to scope expectations of performance capability, cost drivers, and realistic schedule with allocation of cost drivers to fiscal years to inform Information Technology (IT) investment decisions.
• Analyzes, designs, engineers, integrates and upgrades existing and future networks to technologies such as Software Defined Network (SDN), Multi-Protocol Label Services (MPLS), advanced networking services and other emerging technologies.
• Performs engineering planning, design, and reviews designs of information systems, designed as a total integrated system that incorporates a scalable hierarchy.
• Provides technical engineering support to the DoD Information Network (DoDIN) and Global Netcentric solutions, software engineering, test and evaluation, security engineering, network engineering, systems engineering or systems analysis.
• Performs engineering planning, design, and reviews designs of information systems, designed as a total integrated system that incorporates a scalable hierarchy.

Requirements

Conditions of Employment

• Must be a U.S. Citizen.
• Males born after 12-31-59 must be registered or exempt from Selective Service.
• This national security position, which may require access to classified information, requires a favorable suitability review and security clearance as a condition of employment. Failure to maintain security eligibility may result in termination.
• This is a Mission Essential Position.
• This is a Drug Testing Position.

Qualifications

In order to qualify for this position, you must meet the requirements described below.

Basic Requirements; 0854 and 0855 series
Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor’s degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
Combination of education and experience — college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure — Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board’s eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test — Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional 1 For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org. 2 The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html. 2 registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses — Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum — Successful completion of a curriculum leading to a bachelor’s degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor’s degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

To qualify for the 1550 position you must meet the basic requirement:
Bachelor’s degree in computer science or bachelor’s degree with 30 semester hours in a combination of mathematics, statistics, and computer science. At least 15 of the 30 semester hours must have included any combination of statistics and mathematics that included differential and integral calculus. All academic degrees and course work must be from accredited or pre-accredited institutions.

Qualifying Experience:
To qualify at the GG-13, your resume must describe at least one year of experience that demonstrates the competencies necessary for immediate success in the position. Experience refers to any paid or unpaid experience, including volunteer work and Military service, that would be considered equivalent to work normally performed at the next lower grade level in the federal service. For this position, qualifying experience is defined as: Managing Multiprotocol Label Switching (MPLS) based Internet Protocol (IP) networks; and identifying cyberspace vulnerabilities in a service provider or enterprise environment.

Candidates must describe how they meet the qualifying experience and/or selective placement factor(s) within the body of their resume. All qualifications must be met within 30 days after the closing date of this announcement.

Education

To be creditable, education must have been obtained in an accredited college or university. You must report only attendance and/or degrees from schools accredited by accrediting institutions that are recognized by the U.S. Department of Education .

Foreign Education: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show that the education credentials have been evaluated by the National Association of Credential Evaluation Services at the time of application. National Association of Credential Evaluation Services .


There is no substitution of education for the qualifying experience at the GG-13 grade level

Required Documents

FOR THIS JOB ANNOUNCEMENT THE FOLLOWING SUPPORTING DOCUMENTS ARE REQUIRED AS THEY APPLY STATED BELOW AND MUST BE RECEIVED BY THE CLOSE OF THE ANNOUNCEMENT. NOT ALL DOCUMENTS WILL APPLY TO EVERYONE.

1. Transcripts (if applicable) If you are substituting education for specialized experience you must submit all of your transcripts. The absence of this information will result in an ineligible rating.
2. SF-50 – (if applicable) Notification of Personnel Action for current or former federal employees- All applicants to include current agency employees must provide your most recent SF50 or the SF50 reflecting Career/Career-Conditional tenure and the highest grade held on a permanent basis.
3. Veterans Preference Documentation (if applicable): Candidates claiming Veterans Preference must submit a DD-214 (Member Copy 4), or, if you are CURRENTLY serving on active duty, a statement of service from your unit which states the date you entered on active duty, the date you are separating, and the campaign medals you have received. For those supplying the statement of service, preference will be verified by a DD-214 (Member Copy 4) upon separation from the military. Veterans with a service-connected disability must also submit a VA letter dated 1991 or later. DoD Components with CES positions apply Veterans’ Preference to preference eligible candidates, as defined by Section 2108 of the Title 5 U.S.C. in accordance with the procedures provided in DoD Instruction 1400.25, Volume 3005, “CES Employment and Placement.”
4. Military Spouse Preference (MSP) Eligible: Military Spouse Preference applicants, must be selected and placed at the highest grade level for which they have applied and been determined best qualified up to and including the full performance level. You must include a completed copy of the Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for Military Spouse Preference. Click here to obtain a copy of the Military Spouse PPP Self-Certification Checklist.
5. Military Reserve (MR) and National Guard (NG) Technicians PPP Eligible: MR and NG technicians PPP applicants must be selected and placed at the full performance level if determined well qualified. You must include a completed copy of the Military Reserve and National Guard Technician PPP Self-Certification Checklist to verify your eligibility for Military Reserve and National Guard Technician preference. Click here to obtain a copy of the Military Reserve and National Guard Technician PPP Self-Certification Checklist.
6. Military Reserve (MR) and National Guard (NG) Technicians Receiving Disability Retirement PPP Eligible: MR and NG technicians receiving disability retirement PPP applicants must be selected and placed at the full performance level if determined well qualified. You must include a completed copy of the Military Reserve and National Guard Technician Disability PPP Self-Certification Checklist to verify your eligibility for Military Reserve and National Guard Technician Disability preference. Click here to obtain a copy of the Military Reserve and National Guard Technician Disability PPP Self-Certification Checklist.
7. Retained Grade PPP Eligible: Retained Grade PPP applicants, must be selected and placed at the full performance level if determined well qualified. You must include a completed copy of the Retained Grade PPP Self-Certification Checklist to verify your eligibility for Retained Grade preference. Click here to obtain a copy of the Retained Grade PPP Self-Certification Checklist.

Your complete Application Package (containing the above required documents) must be received no later than 11:59 pm Eastern Time on 06/02/2024.

WARNING: Failure to submit a complete application package including any required documentation by 11:59 PM (EST) on 06/02/2024, or at the time of application for announcements with an extended closing date, may result in an ineligible rating and loss of consideration. To verify that your application is complete, log into your USAJOBS account, select Application Status and More Information. The Details page will display the status of your application. It is the applicant’s responsibility to verify that information entered, uploaded is received, legible and accurate. HR will not modify answers submitted by an applicant.

How to Apply

To apply for this position, you must provide a complete Application Package. See required documents below.

1. Your Resume

• Your resume MUST include the following information for each job listed: Job title; duties (be as detailed as possible); month & year start/end dates (e.g. June 2007 to April 2008); and full- time or part-time status (include hours worked per week). Read more about what should I include in my federal resume at USAJOBS.
• DO NOT include the following information: Classified or government sensitive information; Social Security Number; Photos of yourself; Personal information, such as age, gender, religious affiliation, etc.; or encrypted and digitally signed documents. Read more about what should I leave out of my resume? at USAJOBS

2. A complete Assessment Questionnaire (if applicable)
3. Other required supporting documents: (SEE THE SECTION OF THIS ANNOUNCEMENT ENTITLED “REQUIRED DOCUMENTS” FOR MORE INFORMATION ON WHAT SUPPORTING DOCUMENTS MAY BE NEEDED)

Click ‘Apply Online’ to create an account or log in to your existing USAJOBS account.

1. Follow the prompts to complete the assessment questionnaire and upload required documents.
2. Please ensure you click the Submit My Answers button to submit your application.
3. Check application status by logging into your USAJOBS account, clicking Application Status, then More Information for this position. Return to an incomplete application by logging into your USAJOBS account and clicking Update Application in the vacancy announcement. You must re-select your resume and other documents from your USAJOBS account or your application will be incomplete.